Lexington Motor Car Company
The Lexington Motor Car Company manufactured automobiles in Connersville, Indiana, from 1910 to 1927. From the beginning, Lexingtons, like most other Indiana-built automobiles, were assembled cars, built with components from many different suppliers. The Thoroughbred Six and Minute Man Six were popular Lexington models. Lexington History
Origins of the Lexington Motor Car Company
The Lexington Motor Car Company was founded in 1909 in Lexington, Kentucky, by Kinzea Stone, a Kentucky race horse promoter from Georgetown, Kentucky. Several months later, the company outgrew its original building.
In 1910, a group of Connersville businessmen noted the community had too much tied up in the buggy and carriage industry, which was being displaced by the growing use of the automobile. The group enticed the infant Lexington Motor Car Company to relocate from Lexington to a new plant at 800 West 18th Street in the McFarlan industrial park, with headquarters at 1950 Columbia Avenue. John C. Moore, the company’s chief engineer, immediately started on improvements to the Lexington to keep the company ahead of its competition. His 1911 multiple exhaust was reported to give 30 percent more power on less fuel. Each cylinder had a separate exhaust. Dual exhaust pipes and mufflers were used.
The company entered both the Glidden Tour and Indianapolis 500 in 1912.
Acquisition and expansion
Financial difficulties were solved in 1913 when E.W. Ansted acquired the Lexington Motor Car Company to assemble the six-cylinder Howard for a contract with a Chicago distributor. The resultant company was named Lexington-Howard. In 1915, the name changed back to Lexington Motor Car Company. The regular four-cylinder engine was supplemented by a light six and a supreme six. With the new Ansted engines, its cars became modern and powerful. In 1916, Lexington was using the Continental engine.
Lexington’s first plant expansion was in 1915. A factory building was erected just north of the office. Also built at the same time was a 100-foot (30 m) smokestack with the Lexington name in lighter color bricks. Four years later the company built a 106,050 sq ft (9,852 m2) assembly building just west of the office. Lexington Motor Ad
In 1917, Moore put together a new frame with a rigid box cross-section that eliminated the problem of jammed doors caused by frame flexing. This car also had an emergency brake affixed to the drive shaft. In 1918, Lexington Motor car Company autos featured hardtop enclosures made by the Rex Manufacturing Company, also of Connersville.
Also in 1918, the newly formed Ansted Engineering Company acquired Teetor-Harley Motor Corporation of Hagerstown, Indiana. In 1919, the 85,306 sq ft (7,925 m2) Ansted Engine building was erected just north of the Lexington plant and extended to 21st Street. The combined Lexington and Ansted facilities measured three blocks long and two blocks wide totaling 270,000 sq ft (25,000 m2) of floor space.
Two short-wheelbase race cars with the powerful Ansted engine were built by Lexington for the 1920 Pikes Peak hill climb. The cars placed first and second in their initial outing and brought home the Penrose trophy. Again in 1924, Otto Loesche won, with an 18-minute 15 second dash and brought the trophy home for keeps. The Penrose trophy is on display at the Fayette County Historical Museum on Vine Street, Connersville Indiana.
The formation of the United States Automotive Corporation was announced by President Frank B. Ansted at the New York Auto Show on January 12, 1920. It was a $10 million merger with the Lexington, the Ansted Engineering Company, and Connersville Foundry Corporation, all from Connersville, plus the Teetor-Harley Motor Corporation of Hagerstown. 1920 marked the high point of Lexington production with over 6,000 built. Lexington 40 Brochure
On December 16, 1921, William C. Durant, founder of General Motors and former GM president, ordered 30,000 Ansted engines for his new Durant Six, being built in Muncie, Indiana, by Durant Motors, Inc. Late in 1921, Alanson P. Brush (designer of the Brush Runabout and consulting engineer to General Motors) sued the company, alleging the Ansted engine infringed a number of his patents. The negative publicity hurt.
Records show in 1922, United States Automotive Corporation, Lexington’s parent company, owned ten different factories building parts for its cars. Auto historian Henry Blommel notes, “It was a great alliance of parts-making plants that found the culmination of its efforts in the finished Lexington car.”
The post-World War I recession of the early twenties destroyed many American automobile manufacturers. Lexington Motor Car Company and United States Automotive Corporation were affected by these recessionary events. Production in 1922 plummeted to roughly a third of that of 1920. In 1923, Ansted Engine Company entered receivership, with Durant as a principal shareholder. Lexington Motor Car Company also entered receivership in 1923. In 1926 and 1927, respectively, E.L. Cord’s Auburn Automobile Company purchased Ansted Engine and the Lexington Motor Car Company. The Lexington was soon phased out.
Cord then invested $2 million in plant and production facilities. The new manufacturing plant was comparable to the most modern assembly plants anywhere in the world. It consisted of 20 buildings on 82 acres (330,000 m2), and 1,500,000 square feet (140,000 m2) of manufacturing area available for the production of 400 bodies and 250 completed cars per day. Sheet metal, wood, engines and other materials entered the plant on the northeast side, and the completed car was delivered to the customer near the southwest corner.
Yearly model changes
The early Lexingtons of 1910 to 1913 were four-cylinder automobiles built with body styles including 2 seat runabouts and roadsters, 5 and 7 passenger tourers, and limousines. The year 1914 marked the introduction of a six-cylinder auto on a 12″ longer wheelbase. In 1915, the Light Six rode on a 2″ shorter wheelbase and the Supreme Six on longer, offering a range of body styles: 3 seat roadster, 5, 6, and 7 passenger tourer, and 7 passenger limousine. In 1916, the Thoroughbred Six and the Minute Man Six tourer also came as a convertible sedan. Both offered electric horns. By comparison, the Enger 40, the FAL, the Oakland 40, the Cole 30 and Colt Runabout were more expensive and the Oldsmobile Runabout, Western’s Gale Model A, the Brush Runabout, were less expensive. Ford’s Model T being the cheapest.
For 1919, there were new, enclosed bodies with names like Coupelet, Sedanette, and Salon Sedan all with six-cylinder engines and a 122 in (3099 mm) wheelbase.
There were two series of 1921 and 1922 Lexingtons: Series S, a 47 hp (35 kW) six-cylinder on a 122 in (3099 mm) wheelbase, and Series T, a 60 hp (45 kW) six on a 128 in (3251 mm) wheelbase; body styles included 5 and 7 passenger tourer, Sedan, Coupe, and Sedanette, and 7 passenger Salon Sedan. In 1924 and 1925, Lexington again offered two versions: the Concord, a 65 hp (48 kW) six on a 119 in (3023 mm) wheelbase, and the Minute Man, a 72 hp (54 kW) six on a 123 in (3124 mm) wheelbase; body styles included 5 and 7 passenger Tourer, Sedan, and Coupe, 5 passenger Royal Coach, and 5 passenger Brougham. In 1926 and 1927, Lexington offered the Model 6-50, a with same engine and wheelbase of the Concord, in 4 passenger Roadster or Landaulet, and a 5-passenger Phaeton, Sedan, or Landau Sedan. Lexington Minute Man Brochure
Production totals for the Lexington Motor Car Company
Lexington Motor Car Company produced 123 vehicles in 1909 up to 6,128 in 1920, followed by a decline to 183 in 1926, the final year.